EpoxyPlus
High performance styrene-free epoxy acrylate
EpoxyPlus is a very high performance, non-shrink, epoxy acrylate resin that is ideal for bonding metal components into masonry, concrete and rock.
EpoxyPlus is supplied in a 400ml, two part, nozzle-mixed cartridge format for consistent quality and easy use, and has been formulated to provide exceptional bonding security with a fast curing time.
EpoxyPlus is a low slump, thixotropic resin and is suitable for horizontal and vertical injection.
Applications
- Anchoring metal fixings, including threaded rods and starter bars, into masonry type substrates including bricks, blocks, stone, concrete and rock.
- Anchoring remedial wall ties (e.g. ResiTies or RetroTies) into masonry type substrates including bricks, blocks, stone, concrete and rock.
Features and Benefits
- Clean, user and environmentally friendly material.
- Anchoring without expansion pressures.
- Ideal for overhead or horizontal use.
- Flows easily under pressure.
- Two part nozzle-mixed resin for consistent quality.
- Gels and cures rapidly.
- High load capacities.
- Supplied in 400ml part-useable cartridges.
Cartridge size
400ml part-useable cartridge
Materials
Epoxy resin and hardener.
Applicator and Accesories
400ml mastic gun
Hole Cleaning Brushes
Installation into solid masonry and concrete
-
Drill a clearnce hole into the subsrate to the correct diameter and depth.
-
Clean the hole of spoil and dust using an airjet or brush.
-
Inject EpoxyPlus to the back of the hole.
-
Immediately insert fixing with a twisting motion.
-
Leave to cure.
-
Attach fixture and tighten nut.
Installation into hollow masonry
-
Drill a clearnce hole into the subsrate to the correct diameter and depth.
-
Insert a perforated sleeve into the hole.
-
Completely fill the sleeve with EpoxyPlus.
-
Slowly insert fixing with a twisting motion.
-
Leave to cure then attach fixture and tighten nut.
| Performance Data | ||
|---|---|---|
| Temp | Gel Time | Service Time |
| 5°C | -- | 180 mins |
| 10°C | 8 mins | 100 mins |
| 20°C | 4 mins | 70 mins |
| 35°C | 1 mins | 40 mins |
| Typical performance: | 12mm diameter bolt, 110mm deep in 14mm diameter hole 30MPa concrete: characteristic tensile load 46.0kN. | |
| Storage: | Store in cool, dry, frost-free conditions, away from direct sunlight, between +5°C and +20°C. | |
